Control Panel has internal backup battery : 36hour back up. Can alarm remotely without the limit of distance. Support GSM/CDMA, English SMS to control system and arm / disarm Can support the function of motion detecting with alarm (Via PIR). Can pre-set 5 alarm Phone Numbers. Can make sure the safety of your home with password operation and control the alarm system by remote controllers and SMS to make it arm, disarm. Can control the switch of lights, air-condition and heater etc with the three output ports by mobile phone or telephone. Control panel has three input ports, which can be connected with three wired detectors. Linear wireless transmission distance in open air without block for control panel : up to 250M Can work with all kinds of wireless detectors or sensors, such as wireless PIR Sensors, beams, gas/smoke detectors, wireless panic buttons All the alarm system is wireless, no need to run wires and is a very easy DIY installation. Especially suitable for places where there is no telephone line. Wireless GSM System Receiver - It is the main part for the system, receiving processing, identifying signals automatically and inputting, storing, and outputting alarm messages. Motion PIR Detectors (Wireless) - Monitoring any movement at any position. Door Magnetic Detectors - Door, window, cabinet and other important places. It can be alarmed and will send a signal to the receiver once it detects movement. Remote controller (Key Fobs) - To control this system including arm, disarm and panic button. Siren - It can send out 120db when receiver alarms. Wireless Siren with Flash - It can send out 120db audio alarm and flash built-in LED. Wireless Smoke Detector - It can be alarmed immediately when smoke is detected. Wireless Panic Button - emergency help, once the button is pressed the system will alarm no matter whether it is armed or not.


http://www.hkvstar.com »